EdgeSequel Sapphire #20/.04، 25mm

Bodybuilder Strength. Gymnast Flexibility.

EdgeSequel Sapphire™ brings next-level performance by combining incredible strength and unmatched flexibility, designed to elevate your endodontic practice.

Full Compatibility

EdgeSequel Sapphire™ is fully compatible with techniques and motors used for Vortex®, Vortex Blue®, and EndoSequence®. Use it exactly as you would with those systems, no learning curve required.

Incredible Strength

EdgeSequel Sapphire™ offers:

• 2x greater resistance to cyclic fatigue than Vortex® Blue
• 8x more resistant than Vortex® and EndoSequence®

Unmatched Flexibility

Made with heat-treated FireWire™ NiTi, this file system can negotiate canals with up to 90° curvature while maintaining performance and anatomical preservation.

Product Overview

• Cross Section: Triangular with open flute design
• Taper: Constant taper up to cutting flutes (15 mm flute length)
• Available Sizes:
  • .04 taper: tip sizes 15–90
  • .06 taper: tip sizes 15–50
• Lengths: 21mm, 25mm, 31mm
• Packs: Four files of same size per pack

FireWire™ NiTi Strength Comparison

Instrument Average Time to Failure (seconds) EdgeSequel Sapphire™ 633 Vortex Blue® 299.9 EndoSequence® 80.9

Test performed using a custom cyclic fatigue system at 500 RPM with 3mm of tip inserted into a 90° curvature test block.

Directions for Use

For current users of Brasseler Sequence®, ESX®, Tulsa Dental Vortex®, Vortex Blue®, Kerr TF Adaptive, or K3 systems: continue using your existing technique, speed, and torque settings.

Suggested Technique

1. Take a #10 hand file to full working length.
2. Use EdgeGlidePath™ to working length. Evaluate resistance level:
   • Tight resistance → Small Canal
   • Medium resistance → Medium Canal
   • Light resistance → Large Canal
3. Small Canal: Use sequence 25/04 → 20/04 (repeat until desired size reaches working length)
4. Medium Canal: Use 35/04 → 30/04 sequence
5. Large Canal: Use 45/04 → 40/04 sequence

Motor Settings

• EdgeGlidePath™: RPM 300–500, Torque 320 g-cm
• EdgeSequel Sapphire™: RPM 500, Torque 410 g-cm (All Files)

Irrigation & Canal Disinfecting

• Use EdgeLube™ 17% Liquid EDTA during all hand and rotary procedures
• Rinse 1 min with EDTA to remove smear layer
• Rinse 5–10 min with full-strength NaOCl
• Rinse 1 min with EDTA to flush NaOCl
• Final rinse 5–10 min with Chlorhexidine

Canal Obturation

Complete obturation using your preferred sealer and .04 or .06 gutta percha points, or opt for EdgeSeal™ and Edge Gutta Percha™ points for best compatibility.